The X2CrNi12 Sheet is manufactured from SS with ferritic structure. This sheet grade is more sensitive towards chemical precipitation. In the case rise of undesired temperatures sheets possibly bear that. The sheet phase does not change at elevated temperatures. Sheets are also easy to weld according to the conventional welding equipment. Extremely high input is avoided by the sheets depending on its seam property. To conquer manufacturing defects manufacturers use only selected material for processing these sheets. Also, they conduct heat treatment process with low cooling with water that enhances its grain structure.
Stainless Steel X2CrNi12 Sheets, X2CrNi12 1.4003 Sheet, SS X2CrNi12 Hot Rolled Sheets, SS X2CrNi12 Sheets Suppliers in Mumbai,India.
Stainless Steel DIN 1.4003 Sheets, Stainless Steel S40977 Sheet, Stainless Steel X2CrNi12 HR Sheets, SS EN 10088-2-2005 X2CrNi12 Cold Rolled Sheets Dealers in India, SS Grade X2CrNi12 Sheets, SUS 410L Sheets Stockist in India .
Table of Contents
Both hot and cold rolling process used for, in the addition of resistant elements sheets offer various good properties listed below-
- Uniform design
- Sturdiness/ durability
- Excellent weldability/ fabricability/ machinability
- Low machining cost
- Easily available
- Convenient to use
- Resistance to oxidation/ corrosion/ abrasion
X2CrNi12 Sheet is available in various specification, grades, material composition, and dimension as per the requirement of clients. With the consideration of national and international standards quality reach the top level. Moreover, the manufacturer performs quality assurance test to check the quality of production.
Following are the tests-
- Flattening/ flaring test
- Mechanical test/ tensile test
- Chemical test/ spectro test
- Ultrasonic test
- Destructive/ non-destructive test
- Visual inspection test
- Third party inspection test
Any specific test also performed on the demand of clients. All the packaging is done on standard packing material so that none of the product gets damage while exporting. These sheets are available at most reasonable rates.
Stainless Steel X2CrNi12 Sheets Specifications:
| Specifications | ASTM A240, ASME SA240 |
| Dimensions | ASTM, ASME and API |
| Standard |
JIS, AISI, ASTM, GB, DIN, EN, etc. |
| Surface | 2B, 2D, BA, NO.4, NO.8, 8K, Mirror,Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm,etc. |
| Finish | Black,Bright Polished,Rough Turned,No.4 Finish,Matt Finish,BA Finish |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc. |
Grade Specifications for Stainless Steel X2CrNi12 Sheets
| EN | DIN | AISI | UNS | JIS | BS | AFNOR |
| X2CrNi12 | 1.4003 | 3Cr12 | S40977 | SUS 410L | X2CrNi12 | X2CrNi12 |
Chemical Properties of SS X2CrNi12 1.4003 Sheets
| C | Si ≤ | Mn ≤ | P ≤ | S ≤ | N ≤ | Cr | Ni |
| ≤0.030 | 1.00 | 1.50 | 0.040 | 0.015 | 0.030 | 10.5 – 12.5 | 0.30 – 1.00 |
Mechanical Properties of X2CrNi12 HR Sheets
| Tensile Strength | Yield Strength | Elongation (%) | Reduction of area (%) | Charpy(Akv) | Hardness |
| 450-600MPa | 260MPa min | 20 | 53 | J min | 200 max |