Stainless Steel X2CrNi12 Sheets, X2CrNi12  1.4003 Sheet, SS X2CrNi12 Hot Rolled Sheets, SS X2CrNi12 Sheets Suppliers in Mumbai,India.

The X2CrNi12 Sheet is manufactured from SS with ferritic structure. This sheet grade is more sensitive towards chemical precipitation. In the case rise of undesired temperatures sheets possibly bear that. The sheet phase does not change at elevated temperatures. Sheets are also easy to weld according to the conventional welding equipment. Extremely high input is avoided by the sheets depending on its seam property. To conquer manufacturing defects manufacturers use only selected material for processing these sheets. Also, they conduct heat treatment process with low cooling with water that enhances its grain structure.

Stainless Steel DIN 1.4003 Sheets, Stainless Steel S40977 Sheet, Stainless Steel X2CrNi12 HR Sheets, SS EN 10088-2-2005 X2CrNi12 Cold Rolled Sheets Dealers in India, SS Grade X2CrNi12 Sheets, SUS 410L Sheets Stockist in India .

Stainless Steel X2CrNi12 Sheets

Table of Contents

Stainless Steel X2CrNi12 Sheets Specification

Equivalent Grades of Stainless Steel 1.4003 Sheets

Chemical Composition of SS S40977 Sheets

Mechanical properties of ASTM A240 SS X2CrNi12 1.4003 Sheets

Stainless Steel SUS 410L Sheets Supplier Cities

X2CrNi12 Stainless Steel Sheets Supplier Countries

Both hot and cold rolling process used for, in the addition of resistant elements sheets offer various good properties listed below-

  • Uniform design
  • Sturdiness/ durability
  • Excellent weldability/ fabricability/ machinability
  • Low machining cost
  • Easily available
  • Convenient to use
  • Resistance to oxidation/ corrosion/ abrasion

X2CrNi12 Sheet is available in various specification, grades, material composition, and dimension as per the requirement of clients. With the consideration of national and international standards quality reach the top level. Moreover, the manufacturer performs quality assurance test to check the quality of production.

Following are the tests-

  • Flattening/ flaring test
  • Mechanical test/ tensile test
  • Chemical test/ spectro test
  • Ultrasonic test
  • Destructive/ non-destructive test
  • Visual inspection test
  • Third party inspection test

Any specific test also performed on the demand of clients. All the packaging is done on standard packing material so that none of the product gets damage while exporting. These sheets are available at most reasonable rates.

Stainless Steel X2CrNi12 Sheets Specifications:

Specifications ASTM A240, ASME SA240
Dimensions ASTM, ASME and API
Standard
 JIS, AISI, ASTM, GB, DIN, EN, etc.
Surface 2B, 2D, BA, NO.4, NO.8, 8K, Mirror,Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm,etc.
Finish Black,Bright Polished,Rough Turned,No.4 Finish,Matt Finish,BA Finish
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.

Grade Specifications for Stainless Steel X2CrNi12 Sheets

EN DIN AISI UNS JIS BS AFNOR
X2CrNi12 1.4003 3Cr12 S40977 SUS 410L X2CrNi12 X2CrNi12

Chemical Properties of SS X2CrNi12 1.4003 Sheets

C Si ≤ Mn ≤ P ≤ S ≤ N ≤ Cr Ni
≤0.030 1.00 1.50 0.040 0.015 0.030 10.5 – 12.5 0.30 – 1.00