5052 Aluminium Sheets & Plates Supplier in India

At Panchdeep Metal Corporation, we take pride in calling ourselves a trusted 5052 aluminium supplier in India, and over the years we have seen a steady rise in demand for this grade because it handles tough service conditions without fuss. We manufacture and supply 5052 aluminium sheet, plate and coil products for clients who need steady performance, predictable strength and bulk availability. Our team keeps the stock moving quickly. Fast delivery matters.

Aluminium Alloy 5052 belongs to the magnesium-rich alloy family. It carries magnesium as the main added element, which gives it strong corrosion resistance next to reliable formability that fabricators appreciate during deep drawing, rolling or shaping work. The alloy is often labelled as a marine-grade choice, and that comes from the way it resists saltwater attack for long service spans. It builds strength without making fabrication harder.

Industries use it in transportation, marine structures, chemical equipment, general engineering and even consumer goods where weight needs to stay low. We offer 5052 aluminium sheet, plate and coil formats in a wide range of tempers so designers or project engineers can select what fits their work. Our stock arrives in coils for high-volume use, wider plates for tanks and structures, and sheets for general fabrications required by OEMs and workshops across India.

Aluminium 5052 Sheet Plates

Table of Contents

Specification For 5052 Aluminium Sheets, Plates & Coils

5052 Aluminium Sheets, Plates & Coils Chemical Composition

Mechanical Properties of 5052 Aluminium Sheets, Plates & Coils

Equivalent Grades of 5052 Aluminium Sheets, Plates & Coils

5052 Aluminium Sheets, Plates & Coils Sheet / Plate Application

Processing & Workability of AA5052 Aluminium

Sometimes the first thing engineers ask us about is how 5052 behaves under bending or rolling, because a large share of projects involve curved panels, expanded surfaces or intricate presswork. The alloy bends smoothly in the O temper. It bends fairly well in H32. That makes it handy for components that need soft curves rather than sharp fractures. Many workshops run it through rollers for cylindrical shapes or segments of tanks, and it holds the curve without springing back too much.

The next part is machining. 5052 aluminium machinability falls in the middle range: not too soft to clog tools, not too tough to cause chatter. Cutting tools with the right feed rate produce a clean finish, especially when the sheet or plate is clamped firmly. Stamping also works well; many manufacturers prefer it because the alloy’s ductility in softer tempers lets the tools create deeper impressions with fewer rejects.

Its weldability is a real advantage. Gas welding, MIG and TIG are all common, and welders often report minimal voids when parameters are set correctly. The heat-affected zone stays stable. Cold working can increase strength a little and bring the material into different tempers, giving more flexibility to designers who want a specific hardness or yield strength. The alloy responds without becoming brittle.

Types of 5052 Aluminium Sheets, Plates & Coils

We produce and supply mainly 7 types of this alloy depending on the application:

Hot Rolled Sheets

Hot-Rolled 5052 Plate

Cold Rolled Sheets

Cold-Rolled 5052 Sheet

Aluminium Coils

5052 Aluminium Coil

Patterned Sheets

Patterned Sheet

Chequered Plates

5052 Chequered Plate

Anodised Sheet Plates

Anodised 5052 Sheet

5052 Aluminium Sheets, Plates & Coils Specifications

Below is the standard specification range we offer as a 5052 aluminium supplier and stockist.

Product Form Standards Thickness Range Width Length / Coil Specs Tempers
5052 Aluminium Sheet ASTM B209, EN 485 0.5 mm-6 mm 1000-2000 mm 2000-6000 mm O, H32, H34, H111
5052 Aluminium Plate ASTM B209, EN 485 6 mm-150 mm 1000-2500 mm Custom cut H32, H34, H112
5052 Aluminium Coil ASTM B209, EN 485 0.5 mm-6 mm Up to 1500 mm Coil ID 508/610 mm, OD as required O, H32, H34

Engineers often check 5052 sheet specifications before finalising material because thickness and temper matter for impact strength and bending behaviour.

Available Sizes & Surface Finish Options

We supply 5052 sheet sizes and plates in a wide range which, in a way, helps projects to avoid unnecessary cutting losses. Thickness starts around 0.5 mm for sheets and goes up to nearly 150 mm for plates. Width options go from narrow strips to full sheets crossing the 2-meter mark. Lengths often run from 2 meters to 6 meters, though we cut to size whenever possible to save fabrication time.

Coils follow standard IDs of 508 or 610 mm, and OD varies depending on coil weight. Surface finishes include plain mill finish for general use, anodised surfaces for better weather performance, and PVC-coated material for protection during transport or fabrication.

Why Choose Us for 5052 Aluminium Sheets, Plates & Coils

We keep a strong stock base, which means urgent orders do not slow down manufacturing timelines for our customers. Our materials pass through strict quality checks so hardness, chemistry and flatness stay within controlled limits. Clients often rely on us for custom cutting because it reduces workshop load and speeds up assembly. We provide competitive pricing, especially for repeat and bulk requirements, and our logistics team ships material on time even during seasonal rush periods.

Because of all these things, we stay committed to being a reliable supplier of 5052 aluminium. It’s simple. We deliver what we promise.